Gear Type Flowmeter- FMR-G610-22

POINTVALUES Gear Type Flowmeter – FMR-G610-22

POINTVALUES FMR-G610-22 is a PD (positive displacement) volumetric flowmeter.

It can be used to measure the flow rate of liquids with a wide range of viscosity including water, gasoline, diesel, lubricating oils, hydraulic oil, and many different greases.

It is used to measure the rate (or speed) of liquid flow in pipelines, and on the inlet and outlet of centrifuge, peristaltic pumps, diaphragm pumps, etc.

Applications

• Engines, auto parts industry, braking system, test bench engine, fuel consumption gauges
• Renewable energy and clean energy system
• Coolant monitoring
• Paint spray system
• Steering system (dosing and filling of engine oil, brake fluid, antifreeze, and anti-corrosion)
• Adhesive coating for windshields, hoods, etc.
• Hydraulic volume and flow rate measurements
• Leak and dripping monitoring
• Dosing and filling two or more liquid ingredients, and mixing in chemical processes and reactors
• Filling and handling of hydrofluoric acid and highly corrosive chemical materials
• Reactor dripping
• Measurement and control of high viscosity products, such as asphalt, ink, honey, syrup
• Liquid flow lines in air conditioners and heat exchangers, refrigerants

General Features

• Measurement Accuracy: ±0.5%
• Repeatability: 0.1%
• High and low temperature tolerability: -40–200℃ (customizable based on clients’ demand)
• Repeatability: ±0.1% of reading
• Power supply: 9–26 VDC
• Communication method: RS485, Modbus-RTU, HART, GPRS, Bluetooth
• Electrical Interface: M20*1.5 (with metal explosion protection)
• Pressure: 50bar/stainless steel 100bar (customizable up to 400bar)
• Multiple output signals: pulse, analog, RS485, and HART
• Usable with highly corrosive liquids (sulfuric acid, hydrofluoric acid, etc.) and highly viscous fluids (syrup, asphalt, honey, etc.)

Functional Features

• Accuracy: 0.5% of reading (within 1:20 range), ±1% of reading (based on 20 CST viscosity)

Technical Features

• Power supply: 24VDC (9–26VDC)
• Fit connection: G1/4 female thread
• Output signal: Analog (4–20mA, 1–5V, or 2–10V), Pulse frequency 5Khz (Max)

Materials

• Main: 1.4305 (SS 304), 1.4144 (SS316L), or Al
• Gears: SS304, SS316L, or high hardness alloy steel
• Bearing: Rolling or plain bearings
• Seals: FKM, NBR, or PTFE
• Flange: GB, DIN, JIS & Customized

Accessories

• Optional male and female adaptor, thread adapter, charger, sanitary clamp connector

Acquired Standards

• Performance standards: JB/T9242, 2015 General technical conditions for liquid volumetric flow meters
• Explosion proof level: Exd II CT 6 Gb
• Protection level: IP65